975 Combo Roll Groover Depth Adjustment - Adjusting screw and integral, index depth gauge. Actuation - Feed screw with 1/2" ratchet wrench (included) or any 15/16" hex. Power Drive Mounting - RIDGID 300 Power Drive 38/57 RPM (Reverse Direction Only).

The Model 975 Combo roll Groover is two tools in one. Like other RIDGID® roll Groovers, the 975 mounts on the RIDGID 300 Power Drive for machine-powered roll grooving jobs, but is also designed to manually roll groove in-place pipe.

• Auto Tracking & Depth Setting Gauge Means Easier Use - The 975 Combo Groover includes new, patented auto tracking technology for significantly easier grooving. Whether you're doing machine-powered or manual grooving, the AutoTrack gauge keeps the pipe automatically engaged to the groover throughout the grooving process. The 975 also includes a permanently depth setting gauge for quicker, repeatable set-up.
• Less Hand Force Required - When manually roll grooving, the 975's 55% higher gear reduction means less hand force required versus competitive manual roll groovers. This is especially helpful for over-head roll grooving.
• Durability And Portability - A tough, ductile iron construction means the 975 can absorb jobsite abuse and provide accurate grooves time after time. A cast-in handle makes the 975 easily portable to and from the jobsite.

• Pipe Capacity
  • 11/4" – 6" Schedule 10 and Schedule 40 Steel, Aluminum, and PVC Pipe.
  • 11/4" – 6" Schedule 10.
  • 11/4" – 2" Schedule 40 Stainless Steel Pipe.
  • 1/2" – 4" Schedule 80 PVC Pipe.
  • With Roll Change 2" – 8" Copper Tube (Type K, L, M, and DWV).